Fiber Optic Drop Cable Clamp
Drop Wire Anchor Bracket for Pole & Wall Mounting - Heavy Duty Galvanized Steel Pole Hook for FTTH Drop Infrastructure
Product Model：span wire clamp
Product Type：Fiber Optic Tension Clamp for Overhead Cables and FTTH Drop Cables
Place of Origin：Guangdong, China – Professional Manufacturer of Power Line and Fiber Optic Hardware
Minimum Order Quantity：100 Pieces, OEM and ODM Services Available
Packaging：Export cartons
Lead Time：15–30 Days with Stable Production Capacity
Shipping Method：In accordance with client requirements
Standards：Manufactured in accordance with GB/T 2314, GB/T 2315, DL/T 764 and DL/T 284
Sample Service：Samples Available for Product Evaluation and Project Testing
Category Fiber Optic Cable Accessories
Get a QuoteProduct Introduction
The Drop Wire Anchor Bracket is a commercial-grade overhead distribution fitting custom-engineered to provide a secure, high-load stationary anchoring hub on wooden poles, concrete towers, or building facades. Purpose-built to streamline the "last-mile" subscriber wire stringing in global FTTH (Fiber to the Home) rollouts and CATV networks, this rugged Drop Wire Anchor Bracket functions as the primary dead-end base designed to capture and hold every type of fiber optic drop cable clamp safely under severe environmental drift.
Constructed via advanced heavy-gauge sheet metal stamping to eliminate physical structural deformation, this universal Drop Wire Anchor Bracket utilizes a rigid dual-mounting profile. The flat base tabs feature pre-punched round bolt holes for quick expansion anchor installation on walls, complemented by precision parallel rectangular slots that permit heavy-duty stainless steel banding to wrap securely around utility poles. Featuring an integrated center pig-tail hook with a dedicated anti-drop security notch, the Drop Wire Anchor Bracket locks the loop of a fiber optic drop cable clamp into place, ensuring telecommunication lines stay properly tensioned without risking accidental unhooking during intense crosswind vibrations.
Technical Parameters
| Telecom Engineering Metrics | Standard Certified Specifications |
| Product Category Mapping | Drop Wire Anchor Bracket / Pole Wall Fastener |
| Primary Deployment Context | Last-Mile FTTH Network Drop Point Creation |
| Compatible Hardware | Secures Loop/Bail of fiber optic drop cable clamp |
| Material Formulation | Premium Hot-Dip Galvanized (HDG) Carbon Steel / Stainless Steel |
| Manufacturing Technology | One-Piece Precision Industrial Sheet Metal Stamping |
| Mounting Compatibility | Dual Setup: Bolt Screws (Wall) & Stainless Steel Banding (Pole) |
| Rated Ultimate Tensile Load | ≥ 3.5 KN (Enhanced Anti-Deformation Threshold) |
| Climatic Working Window | -40 °C to +120 °C All-Weather Endurance |
| Active Service Lifespan | ≥ 25 Years Maintenance-Free |
Technical Parameters Description
Unibody Stamped Metallurgy Matrix : The bridge-shaped frame of this Drop Wire Anchor Bracket undergoes precision stamping, increasing the metal density to resist structural bending when a fiber optic drop cable clamp applies constant pulling stress.
Dual-Application Mounting Geometry : Outfitted with side round screw openings and flat vertical rectangular slots, enabling the Drop Wire Anchor Bracket to quickly adapt from residential brick wall placement to pole strapping.
Anti-Drop Open-Hook Notch : The integrated lower hook of the Drop Wire Anchor Bracket is engineered with a safety notch, preventing the suspended wire bail of any fiber optic drop cable clamp from vibrating out during wind storms.
All-Weather HDG Coating Protection : Every zinc layer or steel edge built into the Drop Wire Anchor Bracket receives a deep thermal galvanizing treatment, eliminating rust in coastal salt spray and chemical industrial corridors.
High-Stress 3.5 KN Balance Threshold : Specially reinforced to support a tensile limit of 3.5 KN , ensuring a high structural safety factor during multi-directional FTTH service wire drops.
Product Features
🔒 Dynamic Anti-Slippage Safety Catch : The engineered angle of the central hook securely captures any fiber optic drop cable clamp , creating a continuous mechanical interlock that holds zero alignment deviation.
🛡 ️ Hardened Anti-Crack Structural Frame : Composed entirely of anti-corrosive alloys and premium heavy-gauge carbon steel, the Drop Wire Anchor Bracket is 100% immune to UV degradation and winter embrittlement.
⚡ Universal Telecom Cross-Selling Companion : Functions as the ideal partner hardware for S-type clamps, STC wedge line fasteners, and J-hook fittings, completing a full-solution portfolio for B2B FTTH distributors.
🛠 ️ One-Man Rapid Multi-Surface Assembly : Requires no specialized hydraulic pumps or heavy machinery. Linemen can band or bolt the Drop Wire Anchor Bracket manually within minutes, cutting contractor project deployment costs.
⏳ Multi-Decade Low-Maintenance Asset : Built with stable rust-proofing properties to sustain permanent heavy tensile sag, providing public communication grids a failure-free outdoor active life matching the main utility pole itself.
Contact & Customization
🛠 ️ OEM/ODM Customization Services
We provide flexible OEM/ODM manufacturing to meet international grid and telecom project requirements for Drop Wire Anchor Bracket orders. We support custom production from technical blueprints (CAD drawings) or physical samples.
- Tel: +86 199-0247-9650
- WeChat / WhatsApp: +86 199-0247-9650
- Email: sales@line-hardware.com
- Address: Guangdong, China
- Company: Guangdong Jinkaite Power Fittings Co., Ltd.
Hot Tags: fiber optic drop cable clamp, China fiber optic drop cable clamp manufacturers, suppliers, factory